/testing/guestbin/swan-prep --fips --nokeys
Creating empty NSS database
Password changed successfully.
FIPS mode enabled.
west #
 ../../guestbin/ip.sh address add 192.0.100.254/24 dev eth0:1
west #
 ../../guestbin/ip.sh route add 192.0.200.0/24 via 192.1.2.23  dev eth1
west #
 # ensure that clear text does not get through
west #
 iptables -A INPUT -i eth1 -s 192.0.2.0/24 -j DROP
west #
 iptables -A INPUT -i eth1 -s 192.0.200.0/24 -j DROP
west #
 iptables -I INPUT -m policy --dir in --pol ipsec -j ACCEPT
west #
 ipsec start
Redirecting to: [initsystem]
west #
 ../../guestbin/wait-until-pluto-started
west #
 ipsec whack --impair suppress_retransmits
west #
 echo "initdone"
initdone
west #
 ipsec auto --add ikev2-base
"ikev2-base": added IKEv2 connection
west #
 ipsec auto --up ikev2-base
"ikev2-base" #1: initiating IKEv2 connection to 192.1.2.23 using UDP
"ikev2-base" #1: sent IKE_SA_INIT request to 192.1.2.23:UDP/500
"ikev2-base" #1: processed IKE_SA_INIT response from 192.1.2.23:UDP/500 {cipher=AES_GCM_16_256 integ=n/a prf=HMAC_SHA2_512 group=DH19}, initiating IKE_AUTH
"ikev2-base" #1: sent IKE_AUTH request to 192.1.2.23:UDP/500 with shared-key-mac and FQDN '@west'; Child SA #2 {ESP <0xESPESP}
"ikev2-base" #1: initiator established IKE SA; authenticated peer using authby=secret and FQDN '@east'
"ikev2-base" #2: initiator established Child SA using #1; IPsec tunnel [192.0.1.0/24===192.0.2.0/24] {ESP/ESN=>0xESPESP <0xESPESP xfrm=AES_GCM_16_256-NONE DPD=passive}
west #
 ../../guestbin/ping-once.sh --up -I 192.0.1.254 192.0.2.254
up
west #
 ../../guestbin/libreswan-up-down.sh ikev2-esp=aes-sha1-modp1536 -I 192.0.100.254 192.0.200.254
"ikev2-esp=aes-sha1-modp1536": failed to add connection: ESP DH algorithm 'modp1536' is not supported
west #
 ipsec auto --delete ikev2-base
"ikev2-base": terminating SAs using this connection
"ikev2-base" #1: deleting IKE SA (ESTABLISHED_IKE_SA) and sending notification
"ikev2-base" #2: ESP traffic information: in=84B out=84B
west #
